User`s guide
Table Of Contents
- Introduction
- TABLE OF CONTENTS
- Chapter 1 Getting started
- Chapter 2 Basic operations
- Plotting procedures overview
- Turning the power on and off
- Installation operations
- Online and offline
- Replacing paper rolls
- Replacing the toner
- Replacing the waste toner bottle
- Replacing the process cartridge
- Manual paper feeding (cut paper)
- Pause, continue, cancel (and additional printing)
- Web function
- Cleaning the exterior
- Using paper of new standard series
- Using paper of Chinese standard series
- Limiting rolls to be used
- Chapter 3 Menu overview
- Chapter 4 Basic Menu Operation
- Chapter 5 "SETUP" Menu
- Chapter 6 "DEVICE" menu
- Chapter 7 "PAPER" menu
- Chapter 8 "FUNCTION" menu
- Chapter 9 "PROTOCOL" menu
- Chapter 10 "RESET" menu
- Chapter 11 "SYSTEM" menu
- Chapter 12 Ethernet parameter "ETHERNET"
- Chapter 13 Terioplot
- Chapter 14 Troubleshooting
- Appendix
10-2
Reset functions
The reset menu is used to execute the reset functions.
SYSTEM RESET
Restarts the system.
Turns the device to power ON condition.
All received data is cleared.
PORT RESET
Executes the communication reset for the selected logical port.
Only active Ethernet ports are displayed for the port reset.
uneMmetiyhcrareihtsriFretemaraP
TESER
TESERMETSYS#
>
TESERTROP#
1TROP>
1TROP
Me nu Mo d e
#SYSTEM RESET
>
[Enter ] t o I nput