User`s guide
Table Of Contents
- Introduction
- TABLE OF CONTENTS
- Chapter 1 Getting started
- Chapter 2 Basic operations
- Plotting procedures overview
- Turning the power on and off
- Installation operations
- Online and offline
- Replacing paper rolls
- Replacing the toner
- Replacing the waste toner bottle
- Replacing the process cartridge
- Manual paper feeding (cut paper)
- Pause, continue, cancel (and additional printing)
- Web function
- Cleaning the exterior
- Using paper of new standard series
- Using paper of Chinese standard series
- Limiting rolls to be used
- Chapter 3 Menu overview
- Chapter 4 Basic Menu Operation
- Chapter 5 "SETUP" Menu
- Chapter 6 "DEVICE" menu
- Chapter 7 "PAPER" menu
- Chapter 8 "FUNCTION" menu
- Chapter 9 "PROTOCOL" menu
- Chapter 10 "RESET" menu
- Chapter 11 "SYSTEM" menu
- Chapter 12 Ethernet parameter "ETHERNET"
- Chapter 13 Terioplot
- Chapter 14 Troubleshooting
- Appendix

8-9
▼Setting items
Chapter 8 "FUNCTION" menu
(Sample of print)
Job information Print item
Log Log file saving position (1 to 65535) (4 characters)
Job Job No. (1 to 999) (3 characters)
Req Job generation (spool) No. (1 to 999)
PDL
Process PDL (5 characters) HPGL/DSCAN/TIFF/CALS
/COPY/SCAN
Port
Protocol, port No. (4 characters)
Protocol: Fxx (FTP), Lxx (LPR), Xxx (XPT), PARA, USB
Port : 1 to 10
IP-address IP address (15 characters)
File File name (12 characters)
User User name (12 characters)
Input Size Received data size (5 characters)
Output Page No. of prints of job (3 characters)
Output Acc A4/A3 converted No. of prints (3 characters)
Date Reception date
Job Start Job start time (reception start time)
Job End Job end time (print end time)
Counter Acc*10 Total counter (A4/A3 converted) (unit: 10 sheets)
Counter Run*10 Total distance (unit: 10 m)
Result
Printing status
NORMAL: Normal completion
DELETE: Data deleted
CANCEL: Printing (processing) cancelled
ERxxxx: Error corrected (error log No.)
EXTRA: Additional printing
AGAIN: Reprinting