User`s guide

5-27
▼Setting parameter items
Chapter 5 "SETUP" Menu
■DRAWING (DSCAN only)
Sets whether or not to plot DRAWING. This setting is performed on the
third hierarchy.
<Parameter (choice input method)> : Default value
NOP DRAWING Plot is not performed.
EOF DRAWING Plot is performed.
■PAPER NO.(DSCAN only)
Allows for setting how to handle the paper type No. When handling the
paper type No. as the paper source, paper supply is controlled as listed
below.
This setting is performed on the third hierarchy.
<Parameter (choice input method)> : Default value
PAPER SOURCE/ Handles paper type No. as the paper source.
PAPER TYPE/ Handles paper type No. as the paper type.
OFF/ Disables paper type No. of information block.