User`s guide
Table Of Contents
- Introduction
- TABLE OF CONTENTS
- Chapter 1 Getting started
- Chapter 2 Basic operations
- Plotting procedures overview
- Turning the power on and off
- Installation operations
- Online and offline
- Replacing paper rolls
- Replacing the toner
- Replacing the waste toner bottle
- Replacing the process cartridge
- Manual paper feeding (cut paper)
- Pause, continue, cancel (and additional printing)
- Web function
- Cleaning the exterior
- Using paper of new standard series
- Using paper of Chinese standard series
- Limiting rolls to be used
- Chapter 3 Menu overview
- Chapter 4 Basic Menu Operation
- Chapter 5 "SETUP" Menu
- Chapter 6 "DEVICE" menu
- Chapter 7 "PAPER" menu
- Chapter 8 "FUNCTION" menu
- Chapter 9 "PROTOCOL" menu
- Chapter 10 "RESET" menu
- Chapter 11 "SYSTEM" menu
- Chapter 12 Ethernet parameter "ETHERNET"
- Chapter 13 Terioplot
- Chapter 14 Troubleshooting
- Appendix

5-23
▼Setting parameter items
Chapter 5 "SETUP" Menu
<Parameter (choice input method)>
FIX SCALE A
Automatically scaled to A4 fix size.
Automatically scaled to A3 fix size.
Automatically scaled to A2 fix size.
Automatically scaled to A1 fix size.
Automatically scaled to A0 fix size.
FIX SCALE 9"
A Automatically scaled to 9×12 inch series A fix size.
B Automatically scaled to 9×12 inch series B fix size.
C Automatically scaled to 9×12 inch series C fix size.
D Automatically scaled to 9×12 inch series D fix size.
E Automatically scaled to 9×12 inch series E fix size.
FIX SCALE 8.5"
A Automatically scaled to 8.5 × 11 inch series A fix size.
B Automatically scaled to 8.5 × 11 inch series B fix size.
C Automatically scaled to 8.5 × 11 inch series C fix size.
D Automatically scaled to 8.5 × 11 inch series D fix size.
E Automatically scaled to 8.5 × 11 inch series E fix size.