User`s guide

5-17
▼Setting parameter items
Chapter 5 "SETUP" Menu
DRAWING PARAM.
This is a parameter group that you need to set plotting conditions.
■OFFSET MODE
Allows for setting which offset function is used from among MARGIN/
VARIABLE SIZE OFFSET/FIXED SIZE OFFSET. This setting is
performed on the third hierarchy.
<Parameter (choice input method)> : Default value
MARGIN MARGIN is used as the offset function. Setting of MARGIN
is enabled.
VARIABLE SIZE Offset X and Y are used as the offset function. Offset X and Y
setting is enabled. Drawing size increases or decreases
depending on the offset value.
FIXED SIZE Offset X and Y are used as the offset function. Offset X and Y
setting is enabled. As the drawing size does not vary
depending on the offset, data may be clipped. If the drawing
size is not set to the data, offset is performed in the
VARIABLE SIZE mode.