User`s guide

3-17
Chapter 3 Menu overview
System menu “SYSTEM”
Press the [ ] key on the display below to enter the System menu.
The system will be reset after these changes are made.
▼Menu screen
Press the [ ] key
Me nu Mo d e
MENU
#SYSTEM
Me nu Mo d e
SYSTEM
#COMM. P ARAM
Menu Item Function
COMM. PARAM Sets the communication parameters.
WEB LOCK Sets whether to allow setup privileges from the web
browser to User administrator and above.
ENABLE SERIES Sets the media series to be used in this device.
APPLY ROLL Sets the roll sizes for each media series you use in this
device.
CHINA SIZE Sets the roll sizes to be used in China in this device.
SYSTEM SCAN START Sets whether scan is started with START key or
automatically when the original is input.
MODE TIMEOUT Sets the time until the mode transits to STAND-BY if no
key is operated.
COPY SETTING Since this setting is only for Japan, leave the setting as it is.
INITIAL SET Sets all parameter settings to their initial values.
LANGUAGE Switches the language on the LCD message display.
LENGTH UNITS Switches the length unit (millimeter or inch).
ADMIN PASSWORD Specifies the administrator password. This password
prevents the settings of the plotter from being changed.