Specifications

6-1
CHAPTER 6
COMMAND DESCRIPTIONS
This chapter describes the functions of the commands supported by the printer.
6.1 THE SUMMARY OF COMMAND FUNCTION
The printer supports the ESC/P based commands.
Table 6-1 Command Summary (1/4)
Command Function Page
ESC 'C' Set Page Length at n Lines 6-19
ESC 'C' 0 Set Page Length at n Inches 6-19
ESC 'N' Set Bottom Margin 6-19
ESC 'O' Cancel Bottom Margin 6-20
ESC 'Q' Set Right Margin 6-20
ESC 'l' Set Left Margin 6-21
ESC '0' Set 1/8-inch Line Spacing 6-23
ESC '2' Set 1/6-inch Line Spacing 6-23
ESC '3' Set n-dot-line Line Spacing 6-23
ESC 'B' Set Vertical Tab Positions 6-25
ESC 'D' Set Horizontal Tab Positions 6-26
CR Print and Carriage Return 6-27
LF Print and Line Feed 6-27
FF Page Feed (Form Feed) 6-27
ESC 'J' Print and Feed Paper 6-28
GS '<' Marked Paper Form Feed 6-28
HT Execute Horizontal Tab 6-29
VT Execute Vertical Tab 6-29
ESC '$' Set Absolute Position 6-29
ESC '\' Set Relative Position 6-29