Specifications

4-12
Operation 1: SWDIP switch selection
(a) If pressing the FEED switch after printing the message shown below, the function setting shifts
(operation 2).
If pressing the POWER switch instead of the FEED switch, the details of the printed SWDIP
switch (SWDIP switch 1) are not changed, and the next SWDIP switch is selected (operation
1).
 Hint
 "********" in the message indicates the setting of the SWDIP switch. The leftmost bit is the
most significant bit (SWDIP*-8) and the rightmost bit is the least significant bit (SWDIP*-1).
 If SWDIP switches 1 to 4 are skipped, the function setting mode can be terminated
(operation 3).
Operation 2: SWDIP switch setting
(a) When the message shown at the following is printed, set the bits from the most significant bit
(SWDIP*-8) to the least significant bit (SWDIP*-1).
To set 1: Press the FEED switch.
To set 0: Press the POWER switch.
For example, to set 10101110, press the switches in the following sequence:
FEED, POWER, FEED, POWER, FEED, FEED, FEED, FEED, POWER.
(b) When the switches are pressed eight times (for eight bits), the following message is printed.
When the FEED switch is pressed, the message shown at the following is printed, and the setting is
saved.
When pressing the POWER switch instead of the FEED switch, the message shown at the following is
printed and the setting is not changed.
After this operation, the function setting shifts next SWDIP switch (operation 1). After setting SWDIP switch 4,
the setting function exits setting mode (operation 3).
DIP SW-1 Not Changed.
DIP SW-1=******** Saved.
DIP SW-1=********” Save Setting? Yes: Feed SW / No: Power SW
Input 8 bits. 1: Feed SW / 0: Power SW
DIP Switch setting mode.
DIP SW-1=******** Change Setting? Yes: Feed SW / No: Power SW