Specifications

4-4

4.1.2 Function Settings(SWDIP2)

Table 4-2 Function Settings (SWDIP2)

Value

SWDIP Function

0 1

2-8 Auto Status Output Enable

Disable

2-7 Kanji Code Shift-JIS Code

JIS Code

2-6 Font Size 16 dots

24 dots

2-5 Auto Power Off Enable

Disable

2-4 Character Set IBM Compatible

ANK

2-3 Auto Loading Disable

Enable

2-2

2-1

Data Input Mode See below

 Auto Status Output selection

When Auto Status Output selection sets to Enable, the printer sends printer status to the host

device every one second.

Refer to the descriptions of Automatic Status Response (DC2 'e') command for the code to be sent.

Moreover, refer to 6.7 INITIAL AUTOMATIC STATUS TRANSMISSION for more details.

(NOTE) When this function set to Enable, the printer keeps on storing data into the

transmission buffer if the printer status is not received.

The condition of the transmission buffer as buffer full may not work because

status data can not be created. Note that the printer does not perform printing

processing until the transmission buffer full is cleared.

 Kanji Code selection

Select Kanji Code in default as JIS Code or Shift-JIS Code. This setting can be changed by Select

Kanji Code System (FS 'C') command (6.5.11 Kanji Character Set Selection commands).

 Font Size selection

Select Font Size in default as 16 or 24 dots. This setting can be changed by Select Character Font

Size (DC2 'F') command (6.5.24 Character Set Command).

 Auto Power Off selection

When Auto Power Off selection sets to Enable, the printer turns itself off after passing a set time.

This setting can be changed by Set default/Set test print header (DC2 'i') command (6.5.25

Auxiliary Function Commands). The default value is 30 minutes.

 Character Set selection

Select Character Set as IBM compatible or ANK. This setting can be changed by Select character

code table (ESC 't') command. See Appendix A CHARACTER CODE for character code.

 Auto Loading selection

When Auto Loading selection sets to Enable, the printer detects the thermal paper inserted from

the paper slot and loads that automatically.