Specifications

6-110
Reading each default values is transferred data that correspond of m by the hexadecimal of 2 or
4 digits to the host device.
Reboot or execute reset command after turning off the POWER switch to set the default
settings.
After executing Execute Routine Format command (DC2 'E' 2 n), the printer cancels setting of
42H to 48H as follows:
Line feed : 34 dots
Character spaces : 4 dots
Line buffer : Cleared
Kanji character space : Left: 0; Right: 8 dots
International language : Japanese
Left margin : Cleared
Right margin : Cleared
Note Using much of this command may cause the FLASH memory damage. It is recommended that
this command be used 10 times/day.