Specifications

6-88
6.5.22 Page Mode
The page mode function maintains a rectangular area with an arbitrary size, deploys the printed data there,
and prints characters in the normal direction or rotated 90° clockwise. The page mode function allows the user
to layout printing material more freely thanks to the above features.
DC2 'z' 0 n x yl yh Page Mode Select
Code 12H 7AH 00H n x yl yh
0
n1
0
x104
0
yh  256 + yl2400
Function Specifies the page mode.
Specify the page size with x, yh and yl.
x : Horizontal length (by byte)
yhX256+yl : Vertical length (by dot)
Specify the print direction of data with n
0: Normal direction
1: Rotated 90° clockwise
Page length in normal direction is specified by yh and yl.
Page length in rotated 90° clockwise is specified by x.
When x, yh and yl is out of range, this command is ignored.
Ignores the Set page length at lines (ESC 'C') or Set bottom margin (ESC 'N').
Ignores the setting of left margin and right margin.
Cancels the Stamp Select.
Clears data in the line buffer.
Default Not selected
あいうえお
かきくけこ
さしすせそ
たちつてと
832 ﾄﾞｯﾄ
↑
紙送り
方向
通
常
モード
Normal direction
X mm
Paper feed direction
(yh x 256 + yl) / 8 mm
ABCDE
FGHIJ
KLMNO
PQRST
Rotated 90° clockwise
Paper feed direction
(yh x 256 + yl) / 8 mm
Rotated 90° clockwise
ABCDE FGHIJ
KLMNO PQRST
VWXYZ ABCDE
X mm
Beginning
Beginning