User`s manual

Geophysical Survey Systems, Inc. HandySan
User’s Manual
MN70-380 Rev B 4
Data Printout:
1. Install a charged battery in the printer.
2. Connect printer to the serial port (back panel) using the supplied cable and turn it On.
3. On setup screen, select Output to Printer.
4. Press Set to return to data screen
5. Press Print to print data.
Note: For more details see the User's Guide for Seiko Instruments printer model DPU-3445-20.
Data Transfer to a PC
Note: The file Handyfer.exe must be present on the PC.
1. Connect Handyscan and PC using a 9-pin null modem cable.
2. Start Handyfer.exe on the PC and select the appropriate data type (Grid Lines 1-13,
14-26 or Non-grid Data).
On Handyscan:
3. On setup screen, select Output to computer (binary).
4. Set baud rate to 57600.
5. Press Set to return to data screen.
6. Press Print.
Displays scan # during transfer
When the data transfer is finished, PC will prompt you to save data.