User`s guide

-
9
-
(7) Paper outlet
Paper port with a paper cutter. When the
platen cover is closed, paper is
discharged from the top of the printer.
(8) Thermal head
The thermal head prints characters on
the paper. It is very hot immediately after
printing.
(9) Platen cover
When the platen cover is opened, the
thermal head moves away from the
paper. Open this cover to remove paper
or perform head cleaning.
(10) Platen roller
The platen roller brings the paper in
contact with the thermal head. The
platen roller is turned to feed the paper.
(11) Power connector
Connects the AC adapter to this
connector.
(12) Paper slot
Paper inlet
(13) Battery connection terminal
Battery connection terminal
(14) Battery release button
Releases the battery pack from the
printer.
Lamp Display
Lamp display
POWER lamp
ERROR lamp
Power OFF Off Off
Power ON (standby mode) On Off
Paper-out, platen cover open On On
Battery low, power failure Blink On
Recharging Blink Off
Function setting mode Off On