Specifications

TECHNICAL GUIDE

II. REMARKS ON DISASSEMBLING AND REASSEMBLING

Cal. 4F32A, 8F32A, 8F33A, 8F35A

● Hour, minute and second hands

• For disassembling and reassembling, use the movement holder for exclusive use with the respective

calibres.

• When installing the hands, place the movement directly on a flat metal plate or a riveting plate.

• How to set the hands

With the battery installed, place the movement directly

on a flat metal plate or a riveting plate, taking care not

to press down the hooking portions.

To install the hands:

Turn the crown clockwise until the date changes, and install the hands so that they point to the 12 o’clock

position.

To install the hands so that the date changes more accurately as the hands indicate 12 o’clock midnight:

1) Turn the crown clockwise until the date changes.

2) Give the crown four counterclockwise turns to make the date return to the previous date.

3) Turn the crown slowly clockwise until the date changes again.

4) Install the hands so that they point to the 12 o’clock position.

• Setting position of the movement on the exclusive movement holder

Check that the pins of the movement holder are securely set to the corresponding holes of the

movement.

[ Movement holder 4F3-T for the dial side of Cal. 4F32A movement ]

[ Movement holder 8F3-T for the dial side of Cal. 8F32A, 8F33A and 8F35A movements ]

Hooking portion

Battery

Hole to set the pin