Specifications

TECHNICAL GUIDE

Cal. 4F32A, 8F32A, 8F33A, 8F35A

* If the year, month or date is not correctly set, repeat the procedure of inputting the calendar data

starting from step “1”.

7 Circuit block cover

When setting the circuit block cover, take care not to press down the terminal for battery check and the

grounding terminal.

[ Cal. 4F32A ] [ Cal. 8F32A, 8F33A and 8F35A ]

Terminal for battery check Terminal for battery check

8 Circuit block

Before replacing the circuit block, make sure that the crown is pulled out to the first click.

Also, check that the tip of the reset lever is positioned at the center of the eyehole as shown in the

illustration below, and then, reassemble the circuit block.

Note: When setting the circuit block, take care not to press down on the reset lever.

Grounding terminal

Reset lever terminal

9 Date driving contact point spring

10 24-hour contact point spring

• Setting position

24-hour contact

point spring

4281 118

Date driving contact

point spring

4281 115

Note: The date driving contact spring and the 24-hour contact point spring contact with the circuit block

to drive and control the ultrasonic motor. Handle them with care so as not to bend or straighten

these parts, as this will cause defective contact with the circuit block, resulting in a malfunction

of the ultrasonic motor and defective calendar indication.