Specifications

TECHNICAL GUIDE

Cal. 4F32A, 8F32A, 8F33A, 8F35A

• How to install the battery (For Cal.4F32A, 8F32A, 8F33A and 8F35A)

[A] When the dial and hands are installed, set the time to 6:00 AM or PM.

[B] When the dial and hands are not installed, direct the notched portion of the 24-hour hand toward

the 9 o’clock side.

Note: When installing the battery, take care lest the battery connection (–) should touch the four

hooking portions of the circuit block cover, the grounding portion and the portion for battery

check.

1. Before installing the battery, straighten the three hooking portions of the insulator for battery (A).

Notched portion of 24-hour hand

9 o’clock side

Grounding portion

Hooking portion

Insulator for battery (A)

Portion for battery check

2. First, set a part of the battery into the portion for battery check in the direction indicated by the arrow

1 , and then, press it down to install it completely.

Hooking portion

Portion for battery check

Grounding portion

Note: Set the insulator for battery (A) securely in position, as it easily gets out of position.