Specifications

96
97
Solution
Wind the mainspring and reset the time. While you are wearing the watch or when you take it o󰮏, check
the remaining power shown by the power reserve indicator and wind the mainspring if necessary.
Wear the watch for an extended period of time, or when taking o󰮏 the watch, turn the crown to wind the
mainspring if the remaining power shown by the power reserve indicator is not su󰮐cient for the next
use.
Return the watch to a normal temperature so that it works accurately as usual, and then reset the time.
The watch has been adjusted so that it works accurately when it is worn on your wrist under a normal
temperature range between 5℃ and 35℃ .
Correct this condition by moving and keeping the watch away from the magnetic source. If this action
does not correct the condition, contact the retailer from whom the watch was purchased.
Reset the time. If the watch does not return to its normal accuracy after resetting the time, contact the
retailer from whom the watch was purchased.
Contact the retailer from whom the watch was purchased.
If the watch is left at a temperature below 0℃ , it may stop if the power reserve indicator is showing
less than one-sixth of the power reserve. In such a case, turn the crown to wind the mainspring.
It takes several seconds before the adjustment function starts working. Set the time after the second
hand moves for approximately 30 seconds to set the time correctly.
Advance the hour hands for 12 hours to correctly set the time and date.
■ TROUBLESHOOTING
Trouble Possible cause
The watch stops operating.
(The chronograph hands do not move.)
The power supplied by the mainspring has been con
-
sumed.
Even though you wear the watch every day, the
power reserve indicator does not move up.
The watch is worn on your wrist only for a short pe
-
riod of time, or the amount of arm movement is small.
The watch temporarily gains or loses time.
The watch has been left in extremely high or low tem
-
peratures.
The watch has been left close to an object with a strong
magnetic eld.
You drop the watch, hit it against a hard surface, or
wear it while playing active sports. The watch is ex
-
posed to strong vibrations.
The inner surface of the glass is clouded.
Moisture has entered the watch because the gasket has
deteriorated.
The watch stops even though the power reserve
indicator is not showing “0.”
The watch has been left at a temperature below 0℃ .
Right after starting the watch, it seems that
the second hand moves more quickly than usual
when setting the time.
When starting the watch, it takes a little time before
the adjustment function starts working (this is not a
malfunction).
The date changes during daytime. AM/PM is not correctly set.
⇒ ● Refer to “How to manually wind the mainspring by turning the crown” on page 59.
● Refer to “How to set the time” on page 62.
※ In the event of any other problem, please contact the retailer from whom the watch was purchased.
ガランテ専用フリーダイヤル
０１２０－３０２－６１７
受付時間：月曜～金曜 9:30 ～ 21:00
 土曜・日曜・祝日 9:30 ～ 17:30
お客様相談室
〒 100-0005 東京都千代田区丸の内 3-1-1国際ビル
〒 550-0013 大阪市西区新町 1-4-24 大阪四ツ橋新町ビルディング

本 社 東京都港区芝浦一丁目 2 番 1 号 〒 105-8467
http://www.seiko-watch.co.jp