Specifications

8 - 10
8.6.2 MOUNTING THE HEAD UNIT
➀
Move the head carrier to a position
that permits easy replacement (see
Figure 8-15).
➁
Insert the head unit terminal between
the platen and the guide pin and head
feeding screw with the soldered
surface of the head unit terminal
upwards (see Figure 8-15).
Holding the solder-plated face upward,
insert the head unit terminal so that it
passes in front of the platen and under
the guide pin and the head feed
screw.
➂
After inserting the head unit
terminal, arrange the components as
shown in Figure 8-16.
Then, rotate the head portion of the
unit by 90 into the position shown in
Figure 8-13.
Figure 8-15 Inserting the Head Unit
Terminal
Figure 8-16 Rotating the Head Portion
of the Unit