Specifications

8 - 8
8.6 REPLACEMENT OF HEAD UNIT
The head unit can be replaced on two of the models in the MTP Series: MTP401
and MTP402.
8.6.1 Removing Head Unit
➀
Move the head carrier to position A by turning the motor gear by hand to allow
easy replacement of the head unit (see Figure 8-11).
Figure 8-11 Moving the Head Carrier
➁
Remove the flexible lead wire from
the cable support of the flexible
cable plate.
Take the adhesive off of the cable
support with tweezers.
Figure 8-12 Removing the Flexible
Lead Wire