Specifications

8 - 3
➀
When mounting with screws With
the
φ
2.2 mm holes at the corners of
the printer as a reference for
positioning, fix the printer on the
printer base by tightening the
tapping screws from the top of the
printer (see Figure 8-5).
➁
When mounting without screwsWith
the
φ
2.2 mm holes as a reference for
positioning, fix the printer by
pressing the eaves on both sides of
the upper portion of the printer.
Figure 8-5 Mounting with Screws
(MTP201 and 401 Printer)
Figure 8-6 Mounting without Screws
(MTP201 and 401 Printer)