Specifications

8 - 2
➁
When mounting without screws
Using the dowels and the
φ
2 mm
holes on the back of the printer as
reference for positioning, fix the
printer by pressing the eaves on
both sides of the upper portion of the
printer (see Figure 8-3).
Do not push on the eaves at the
motor end.
8.1.2 MTP201 and 401 Printers
The MTP201 and 401 printers are
provided with
φ
2.2 mm mounting holes
at the two corners of the printer (see
Figure 8-4).
Figure 8-3 Mounting without Screws
(MTP102 printer)
Figure 8-4 MTP201 and 401 Printers
(Back)