User Manual

49
General Setting 5
MS Function
Value
0 1
5-1
Automatic Status Response Selection
(Auto Status Back)
Enable Disable
5-2
Initialized Response Selection
(Init. Response)
Enable Disable
5-3
Data Discard Selection When Error Occurs
(Error Through)
Enable
Disable
5-4
Data Discard Selection When Output Buffer
Full Occurs
(Response Data Discarding)
Enable Disable
5-5 Reserved - Fixed
5-6 to 7
Initialization Performance Selection After
Paper Setting
(Paper Set Handle)
00B: Disable
01B: Stamp & cut (Stamp&cut)
10B: Initial cut (Standard)
11B: Disable
5-8
Cutting Mode Selection After Paper Setting
(Cutting Method)
Partial cut (Partial) Full cut (Full)
General Setting 6
MS Function
Value
0 1
6-1 to 8
Print Density Selection
(Print Density)
00000000B: 70% 00000111B: 105%
00000001B: 75% 00001000B: 110%
00000010B: 80% 00001001B: 115%
00000011B: 85% 00001010B: 120%
00000100B: 90% 00001011B: 125%
00000101B: 95% 00001100B: 130%
00000110B: 100%
Other than above: Prohibition