User Manual

(4) A message for selecting MS to be set is printed as shown in Figure 11-2 when the printer enters the

Setting Mode.

Press the FEED Switch the number of times corresponding to the selected MS number, and then

press the POWER Switch.

・"8: I/F Setting" is printed for Bluetooth model only. Select this to set Bluetooth connection.

・When pressing the FEED Switch once, "1 : MS1" is selected.

・When pressing the POWER Switch without pressing the FEED Switch, "0: Exit" is selected.

Figure 11-2 MS Selection Message

(5) A message for selecting the function assigned to the selected MS is printed as a sample shown in

Figure 11-3.

Press the FEED Switch the number of times corresponding to the selected function number, and

then press the POWER Switch.

・When pressing the FEED Switch twice, "2 : Error Through" is selected.

・When pressing the POWER Switch without pressing the FEED Switch, "0 : Return to MS Selection" is

selected.

Figure 11-3 Function Selection Message

(Example: Selected MS1)

[MS Selection]

0 : Exit

1 : MS1

2 : MS2

3 : MS4

4 : MS5

5 : MS7,8

6 : MS9

7 : MS13

8 : I/F Setting

9 : USB Setting

10: International Character

11: Character Code Table

12: Default Setting

Press the FEED switch an equal

number of times to the selected number.

After that, press the POWER SW.

[Function selection of MS1]

0 : Return to MS selection

1 : Interface

2 : Error Through

3 : Auto Activation by AC

4 : Response Data Discarding

Press the FEED switch an equal

number of times to the selected number.

After that, press the POWER SW.