User Manual

27
10. TEST PRINT
The printer can perform a test print.
In the test print, the firmware version, setting values of the function settings, etc. are printed.
 Test Print Procedure : Bluetooth Model
(1) Install the thermal paper in the printer as instructed in "9 LOADING THERMAL PAPER".
Ensure that no error occurs, and then turn off the printer.
(2) Hold the FEED Switch down and press the POWER Switch, then release the POWER Switch first.
Release the FEED Switch when the test print has been started.
Figure 10-1 Test Print Sample (Bluetooth Model)
Figure 10-2
Bluetooth Information Print Sample
Table 10-1
Bluetooth Information
Item Description
Printer Name
Bluetooth Device Name
Address
Bluetooth Address
Auto Connection
Selected iOS Auto Connection
Inquiry
Response Selected Inquiry Response
* Bluetooth Communication *
Printer Name: MP-B30
Address: XX:XX:XX:XX:XX:XX
Auto Connection: Enable
Inquiry Response: Pairing Mode