Specifications

6 7
Resetting
If the unit does not operate properly after
the batteries have been replaced, or if at
any time the unit fails to operate properly,
gently press the “RESET” button on the
bottom of the unit.
NOTE:
Resetting product deletes all the data stored in the memory except for
the Easy Learn memory.
The Easy Learn memory can be kept by selecting “No” at the Easy Learn
Delete selection after the RESET.
Changing Batteries
The battery mark ( ) will appear at the right of the screen when the
batteries are almost exhausted, meaning that it is time to replace them.
• The unit is powered by two AAA alkaline batteries.
• Do not use a previously used battery together with a new battery.
• Make sure that power is switched off before replacing batteries.
•Press the “RESET” button on the bottom of the unit after battery replacement.
• Changing batteries and Resetting erase the calculator memory and initialize
settings.
•Care is needed since if you remove the batteries or press the RESET
switch within three seconds of turning the power off, all the data stored
in the memory will be deleted except for the Easy Learn memory.
The Easy Learn memory can be kept by selecting “No” at the Easy Learn
Delete selection after the RESET.
CAUTION
• The batteries may pose a choking hazard
to small children.
• Keep the batteries and product away from
small children.
• Do not expose the batteries to open flame or
intense heat.
• Rechargeable batteries cannot be used.
•Do not try to recharge batteries.
• Never use batteries other than those
specified.
• Remove the batteries from the unit if you do
not intend to use it for a long duration.