User's Manual
Table Of Contents
- COVER
- COPYRIGHT
- INTRODUCTION
- SAFETY PRECAUTIONS
- OPERATING PRECAUTIONS
- 1. PREPARATION
- 2. NAMES OF PARTS
- 3. POWER CONNECTING
- 4. PAPER SETUP
- 5. ATTACHING AND DETACHING THE BELT CLIP AND STRAP
- 6. TEST PRINTING
- 7. FUNCTION SETTINGS
- 8. CONNECTING TO THE HOST COMPUTER
- 9. CHARGING THE BATTERY PACK
- 10. THERMAL HEAD/PLATEN ROLLER MAINTENANCE
- 11. TROUBLESHOOTING
- 12. SPECIFICATIONS
- 13. OPTIONAL UNITS AND CONSUMABLES
- REAR COVER
-
48
-
12. SPECIFICATIONS
■ Printer Specifications
Standard Printer (-02∗
∗∗
∗/-16∗
∗∗
∗)
Item Specification
Printing method Thermal
Print speed 85 mm/s maximum
Dots available 1280 dots
Printable width 108.4 mm maximum
Dot density 300dpi
Paper feed pitch 0.085 mm
Paper type Paper roll
Paper width 70 to 115 mm
Paper external diameter Max. ∅58 mm
Paper internal diameter 8, 12, 25.4 mm
Interface USB Ver.1.1
RS-232C
Bluetooth Ver.2.0+EDR SPP
*1
Operating temperature range
-15
°
C to 50
°
C / 5
°
F to 122
°
F
Relative humidity range 10 to 85%RH
(no condensing)
Character size
(H x W) Standard size:36 x 18 / 24 x 12 (dots)
(H x W) Kanji size: 36 x 36 / 24 x 24(dots)
Kinds of characters
Katakana character
Extension graphic character
Downloaded character
JIS level 1 and level 2 Kanji character
User defined character
Optional font
Kinds of barcodes
UPC A/E, EAN 8/13, ITF,
CODE39, CODABAR,
CODE93, CODE128, EAN128
Kinds of two dimensional codes
PDF417, QRCode,
MAXICode, DATAMATRIX
Dimensions (W x D x H)
168 x 155 x 87mm
*2
Mass Approx. 760 g *
3
*1
For Bluetooth model only.
*2
Excluding projections. Including a rubber cover.
*3
Excluding battery, paper roll, and belt clip.
Including a rubber cover.
Peeler mounted printer (-17∗
∗∗
∗)
Item Specification
Print method Thermal
Print speed 85 mm/s maximum
Dots available 1280 dots
Printable width 108.4 mm maximum
Dot density 300 dpi
Paper feed pitch 0.085 mm
Paper type Paper roll
Paper width 70 to 115 mm
Paper external diameter Max. ∅58 mm
Paper internal diameter 8, 12, 25.4 mm
Interface USB Ver.1.1
RS-232C
Bluetooth Ver.2.0+EDR SPP
Operating temperature range
-15
°
C to 50
°
C / 5
°
F to 122
°
F
Operating humidity range 10 to 85%RH
(no condensing)
Character size
(H x W) Standard size: 36 x 18 / 24 x 12(dots)
(H x W) Kanji size: 36 x 36 / 24 x 24(dots)
Kinds of characters
Katakana characters
Extended graphic characters
Downloaded characters
JIS level 1 and level 2 Kanji
character
User-defined characters
Optional fonts
Kinds of barcodes
UPC A/E, EAN 8/13
ITF, CODE39
CODABAR, CODE93
CODE128, EAN128
Kinds of two dimensional codes
PDF417, QRCode,
MAXICode, DATAMATRIX
Dimensions (W x D x H)
168
x 155
x 87 mm *
2
Mass Approx. 790 g *
4
*
4
: For Peeler mounted printer only.
Excluding battery, paper roll, and belt clip.
Including a rubber cover.