User's Manual
Table Of Contents
- COVER
- COPYRIGHT
- INTRODUCTION
- SAFETY PRECAUTIONS
- OPERATING PRECAUTIONS
- 1 PREPARATION
- 2 EACH PART OF PRINTER
- 3 POWER CONNECTION
- 4 PAPER SETTING
- 5 TEST PRINTING
- 6 FUNCTION SETTING
- 7 CONNECTING TO THE HOST DEVICE
- 8 RECHARGING THE BATTERY PACK
- 9 THERMAL HEAD MAINTENANCE
- 10 TROUBLESHOOTING
- 11 SPECIFICATIONS
- 12 OPTIONS AND CONSUMABLE PARTS
- REAR COVER
-
25 -
Operation 3: Exiting function setting mode
If pressing the FEED switch when the message shown at the following is printed,
the printer returns to operation (1) and sets SWDIP switch 1 again.
DIP Switch setting mode.
Continue: Feed SW
Quit: Power SW
If pressing the POWER switch, the message shown at the following is printed.
The printer leaves the function setting mode and turns it off. The function setting
is now completed.
Setting Mode Finished.
HINT
The settings can be confirmed by performing test printing after the
function setting.