User's Manual
Table Of Contents
- COVER
- COPYRIGHT
- INTRODUCTION
- SAFETY PRECAUTIONS
- OPERATING PRECAUTIONS
- 1 PREPARATION
- 2 EACH PART OF PRINTER
- 3 POWER CONNECTION
- 4 PAPER SETTING
- 5 TEST PRINTING
- 6 FUNCTION SETTING
- 7 CONNECTING TO THE HOST DEVICE
- 8 RECHARGING THE BATTERY PACK
- 9 THERMAL HEAD MAINTENANCE
- 10 TROUBLESHOOTING
- 11 SPECIFICATIONS
- 12 OPTIONS AND CONSUMABLE PARTS
- REAR COVER
-
39 -
Interface Specifications
· Serial interface
Item Specification
Synchronous Asynchronous system
Baud rate 1200, 2400, 4800,
9600, 19200, 38400,
57600, 115200bps
Data length 7 or 8 bits
Parity None, Even or Odd
Data control Busy or Xon/Xoff
• Connector signals
Pin Signal I/O
1 NC -
2 TxD O
3 RxD I
4 connected to 6 -
5 GND -
6 connected to 4 -
7 CTS I
8 RTS O
3260-8S3 HIROSE ELECTRIC CO.,LTD. or
corresponsive product.
·
USB interface
Item Specification
Version Ver 2.0 based
Printer data transmission mode
Bulk transfer (12M bps)
• Connector signals
Pin Signal
1 Vbus
2 D-
3 D+
4 NC
5 GND
Mini B type
· Infrared interface
Item Specification
Version IrDAVer 1.2 based
BHT Ir protocol based
· Bluetoorh interface
Item Specification
Version Ver 2.0 + EDR based
Transmission output Class 2
Connection mode Peer-to-peer
Plofile Serial port