User's Manual
Table Of Contents
- COVER
- COPY RIGHT
- INTRODUCTION
- SAFETY PRECAUTIONS
- OPERATING PRECAUTIONS
- 1 PREPARATION
- 2 NAMES OF PARTS
- 3 POWER CONNECTING
- 4 PAPER SETUP
- 5 ATTACHING AND DETACHING THE BELT CLIP AND STRAP
- 6 TEST PRINTING
- 7 FUNCTION SETTINGS
- 8 CONNECTING TO THE HOST COMPUTER
- 9 CHARGING THE BATTERY PACK
- 10 THERMAL HEAD/PLATEN ROLLER MAINTENANCE
- 11 TROUBLESHOOTING
- 12 SPECIFICATIONS
- 13 OPTIONAL UNITS AND CONSUMABLES
- REAR COVER
- 5 -
When the AC adapter is used
WARNING
If you find any of the following abnormalities in the AC adapter, unplug the AC cable.
♦ When the AC adapter gave out a nasty smell or smoke, or generated noise.
♦ When the printer case was broken.
If not, it might cause fire or an electricshock. Please ask your dealer for repair.
NEVER disassemble or remodel the AC adapter. If not, it might cause fire, an accident,
or a failure.
DO NOT use any AC cable other than our dedicated one.
If not, it might cause fire, an accident, or a failure.
DO NOT use the AC adapter at any voltage other than the specified power supply
voltage.
If not, it might cause fire, an accident, or a failure.
DO NOT touch the metallic areas of the AC adapter and the connector to avoid
shortcircuiting.
If not, it might cause fire, an accident, or a failure.
Keep the AC adapter away from rain and water. If not, it might cause fire, an accident or
a failure.