User's Manual
Table Of Contents
- COVER
- COPY RIGHT
- INTRODUCTION
- SAFETY PRECAUTIONS
- OPERATING PRECAUTIONS
- 1 PREPARATION
- 2 NAMES OF PARTS
- 3 POWER CONNECTING
- 4 PAPER SETUP
- 5 ATTACHING AND DETACHING THE BELT CLIP AND STRAP
- 6 TEST PRINTING
- 7 FUNCTION SETTINGS
- 8 CONNECTING TO THE HOST COMPUTER
- 9 CHARGING THE BATTERY PACK
- 10 THERMAL HEAD/PLATEN ROLLER MAINTENANCE
- 11 TROUBLESHOOTING
- 12 SPECIFICATIONS
- 13 OPTIONAL UNITS AND CONSUMABLES
- REAR COVER
- 20 -
Detaching the battery pack
Power the printer off.
Remove the hook located on the lower part of the
battery cover from the projection of the printer
and open the battery cover. When the battery
release lever is released in the arrow direction,
the battery pack is pushed out due to its spring
force.
Hints
•
If the battery pack starts to run out soon, the battery life has expired. Purchase a
new’s.
•
When the battery pack is used at low temperature, the usable operation period of the
printer may be shortened.
•
Enabling auto-power off function allows the printer to be automatically turned off after
passing a certain period with no operation. This prevents unnecessary battery
consumption.
(
1
)
(2)
(
3
)