User`s guide

11
4. Maintenance and Cleaning
4.1 Maintenance
Inspect the dryer when the IP-6900 printer is inspected at regular intervals. If failure
or defects are found in the dryer, maintenance personnel is dispatched to the user
site, but the dryer must be sent back to the factory if the failure or defects cannot be
eliminated on site.
4.2 External Cleaning
If the dryer surface is extremely dirty, wipe the surface with soft cross dipped in
water or neutral detergent and squeezed tightly.
Note
-Turn off the power of the dryer during cleaning.
-To prevent the dryer coating from peeling off or discoloring, do not
use thinner, benzene or other involatile solvents for cleaning.