Manualshelf

User`s guide

ManualsBrandsSeiko I Infotech ManualsComputer equipmentIP-6900
39404142434445464748
7
3. Operation
3.1 Operating the Dryer
1.
Turn on the Power switch 2 (the operation panel and air flow lamp go
on).
2.
Turn on the Heater switch 4 to set the operation mode (the Fan lamp
7 and Heater lamp 8 go on).
3.
To change the dryer operation time, adjust the timer with the Timer
switch 5 .
Note
◆ When the remaining time of the timer becomes 0, warm air and air
from the fan stop. Only the fan operates for three minutes to cool
the dryer after warm air stops.
4.
Adjust the air flow of the fan with the Air Flow switch 6.
5.
Turn off the Heater switch 4 to stop warm air operation. The fan
operates for three minutes after warm air stops.
6.
Turn off the Power switch 2 to terminate operation.
Note
◆ The fan also operates for three minutes by turning off the Power
switch 2 without turning off the Heater switch 4 to stop warm air
operation.