User`s guide

2
No. Component name Description
1
Display panel
-
-
Indicates the remaining time on the timer.
Press timer switch 5 ▲ or ▼ to set the timer (from the
minimum one hour to maximum 24 hours).
2
Power switch
-
-
Turns the dryer on and off.
If the power switch is turned off while the heater is
operating, the fan operates for three minutes before
the dryer turns off.
3
Fan switch - Blows air.
4
Heater switch - Blows warm air.
5
Timer switch
-
-
-
Sets the timer.
Operation up to 24 hours can be set (the remaining
time is indicated on the display panel).
The initial value at the first power on is 10 hours.
6
Air flow switch
-
-
Changes air flow of the fan and heater.
The initial value at the first power on is H.
7
Fun lamp - Lights while the fan is operating.
8
Heater lamp - Lights while the heater is on.
9
Air flow lamp
- Indicates the air flow from the fan at three levels, H, M,
and L.
0
Heater Error lamp
- Lights when the heater temperature is abnormally
high.
NOTE
◆ When the Heater Error lamp lights, turn off the Heater switch to
stop warm air operation, and blow air at the maximum flow level
(H) for 10 minutes to cool the inside of the dryer. After the dryer
cools down, turn off the Power switch and breaker. Then contact
our service center.