User`s guide
2-44
Change the Print head height
If the Print head strikes the media due to cockling, or printing on a thick media,
switch the Print head height to High so it can be used.
To switch the height of Print head, use the head up down mechanism.
1
Set the printer to the oine.
(Press
key.)
2
Keep pressing key to display
PH.MAIN MENU.
3
Press “ ” key and then key to
display [PH HEIGHT ADJ].
4
Press key.
5
Open the Front cover and the
maintenance cover and loosen two (2)
Head securing screws.
Head securing screw
Head securing screw
Head up down
mechanism
Head up down
mechanism
#PH HEIGHT ADJ
>
h INK MEDIA REGi
f MEDIA M.ADVg
h REWIND FORM FEEDi
f PH.REC PH.MAINg
#PH HEIGHT ADJ
>OK ?
CARRIAGE MOVING
PLEASE WAIT
OPEN COVER
PH HEIGHT ADJ