User`s guide

2-31
2
Basic Operation
Set the blower unit to the printer
1
Place the blower unit in front of the
printer.
(1) Install the blower unit stand to the
outside of the printer stand.
(2) Push the blower unit until the bar
touches the printer stand.
How to use the blower unit (option)
The blower unit (option) is installed to the paper exit side of the printer and is
used to eectively dry the printed media (ink) processed by the printer.
Note
- To dry the printed media (ink) eciently and to operate the take-up reel unit smoothly,
the use of the blower unit is recommended.
Apply the blower unit when high-speed printing (16m
2
/h, etc.) or high density printing
(with large quantity of ink) is performed.
- IP-182 Blower Unit does not guarantee complete ink drying on all types of media and
printing. Check the drying speed of the media in advance. Perform laminating after the
ink dries completely.
Printer stand
Blower unit stand
Blower unit bar
Printer stand