User`s guide
2-25
2
Basic Operation
How to use the loose take-up ange
1
Adjust the position of the right side ange (take-up: xed side)
Adjust the position of the ange holder (at the left of the paper feed side:
movable side)
Note
- The adjustment is required only at the initial operation of the loose take-up
conguration.
- When the position of the ange holder (at the left of the paper feed side: xed
side) is changed, readjustment is necessary.
(1) Take up the media edge and advance it
to the ange position.
(2) Shift the xed side unit so that the gap
between the right edge of the media
and the loose take-up ange falls within
0-2 mm.
(3) Tighten the knob at the right side (xed side) rmly to secure the ange.
q How to use the take-up reel unit
Media edge
Loose take-up ange
Loose take-
up ange
Right edge of
the media
0-2 mm