User`s guide

2-24
Loose take-up ange installation procedure
In this section, the following procedure is for the right side (xed side). Follow the
same procedure to install the anges to the left side (movable side) (symmetry).
1
Remove the 3 inch adapter.
Use the supplied attachment to remove the
adapter.
2
Install the 3 inch adapter to the loose take-up ange.
Install it to the surface where the sponge is not attached.
3
Install the 3 inch adapter with the loose
take-up ange.
Sponge
3 inch adapter
Loose take-up ange
Right side ange
(xed side)
3 inch adapter