User`s guide
2-17
2
Basic Operation
3
Insert the paper tube on which the
waste paper is axed in the right side
ange (xed side).
Note
- It is not normally necessary to move the position of the right side ange, it is used
as the xed position. However, when aligning with the roller media installation
position to the printer, adjust the position of right side ange.
4
Sliding the left side ange (movable side),
insert it in the paper tube.
5
Tighten the knob at the left side rmly to
secure the ange.
Paper tube
Left side
Right side
Fixing knob
Paper tube