User`s guide

2-14
When the roll media exhausts and the roll media is replaced
When the printer runs out of media, the printer automatically detects the end and
displays a message. Depending on the media’s nishing, (media glued to core) the
printer may not automatically detect. If printing is continued, the printer may be
stained or damaged. Visually check the remainder of media.
1
The message appears on the LCD
screen.
2
After this, according to [Media installation / removal procedure], replace the
media.
When replacing the roll media due to jamming
Refer to [Section 5 Troubleshooting (How to clear media jams) ].
NO MEDIA LOADED
LOAD MEDIA