User`s guide

2-6
Power-o procedure
1
To turn o the power of printer, keep
pressing the power switch on the
operation panel for 2 seconds.
The message shown above is displayed on the LCD to show that the shutdown
process is being executed. The power is o after the shutdown is nished.
To keep the Print head in the good condition at shutdown, the ll cap operation
(state that the cap is lled with ink) is performed.
When turning o the power for a short period of time, by pressing the power
switch while pressing the
key, the ll cap operation is skipped and the
power will be turned o.
However, executing the ll cap operation is normally recommended.
Note
- When the printer power needs to be completely turned o for transportation,
connection to a computer, replacement of internal parts, use the main power
switch at the rear of printer.
- After turning the power o using the power switch in the rear of the printer, wait
at least one minute before turning it back on.
- To keep he Print heads in the good condition, the printer automatically and
periodically the ll cap operation while in standby mode.
It is recommended to keep both the main power switch of the printer and the
power switch on the operation panel on at all times.
SHUTTING DOWN
PLEASE WAIT