User`s guide

1-19
Before use (Basic knowledge)
1
(5) ONLINE state (print pause mode) display
The section illustrates the interrupted state during printing.
The ONLINE LED blinks.
PRINTER PAUSING
PLEASE WAIT
PRINTING
ROLL:1625/PAPER
The ONLINE LED blinks.
PRINTER PAUSED
ROLL:1625/PAPER
PRINTER READY
ROLL:1625/PAPER
- By pressing the key during pause (In the state of ONLINE LED blinking), cleaning
the Print head can be executed.
When canceling printing during pause :
PRINTER PAUSED
ROLL:1625/PAPER
CANCELING
PLEASE WAIT
The ONLINE LED blinks.
PRINTER PAUSED
ROLL:1625/PAPER
PRINTING
ROLL:1625/PAPER
The ONLINE LED lights.
When resuming printing after paused :
(6) ONLINE state (preheating)
This message indicates that the heater is in heating process to reach the preset
temperature.
(7) ONLINE state (During head warming-up)
This message indicates that the heads are warming up.
- Head warming-up is conducted when the room temperature (temperature inside the
printer) is low. Recommended room temperature is 20 to 25°C.
- Head warming-up is a function for stable printing. Do not cancel head warming-up as
much as possible.
- When head warming-up is canceled, the carriage stops at the certain number of scan.
(If the number other than 0 is preset as PH REST PERIOD in MEDIA REG MENU, the value
preset in PH REST PERIOD and PH REST TIME is used.)
PREHEATING
ROLL:1625/PAPER
When pausing during printing
PH WARMING UP
ROLL:1625/PAPER XXm