User`s guide

1-4
Appearance / Name and function of each part
The printer is shown with the name and function of each component.
Printer front (Paper exit side)
Pressure roller up/down lever
This lever xes or releases
the media.
Cap cover
Open it when cleaning the
Capping unit or replacing the
Wiper blade.
Front cover
Close it when printing.
Maintenance cover
Open it when performing the Print
head maintenance (conrmation
and height adjustment) of Print
head.
Operation panel
The lamps and LCD to display
the status of the printer and
keys to set various functions are
assigned.
Media cutter blade
It cuts the media.
Waste ink bottle
Maintenance tool
holder
It is convenient to store
the Maintenance tool.
Media clip
After cutting the media, it clips
the media so as not to drop.
Front paper guide
Tension bar
Take-up sensor
Media clip
After cutting the media, it clips
the media so as not to drop.
Grit roller
T
he grit roller
advances or rewinds
the media.
Pressure roller
When lowering the pressure
roller up/down lever, it pinches
the media.
Platen
It is the media path. To prevent the media
from oating, the suction fan is built in it.
Media edge guard
It protects the Print head from curls and
hachures at both edges of a media.
Paper ejection sensor
It detects the presence/absence of the
media.