User`s guide

1-3
Before use (Basic knowledge)
1
Environmental conditions
¢ Operating temperature and humidity levels
The printer should be used within the temperature and humidity levels shown
below.
Temperature : 15 °C to 30 °C (60 °F to 86 °F)
Humidity : 30% to 70%
¯ To obtain better print quality, use the printer within temperatures of 20 to
25 °C (68 °F to 77 °F.)
¯ To keep a stable and good print quality, the printer slows down the print
speed when the operating temperatures exceeds 40 °C (104°F).
Note
- When the printer is used out of range of the operating temperature and
humidity, the print quality may be degraded and/or print may be stopped.
- It takes time for the printer to reach the operating environment temperature
and humidity. To get good printed image quality, it is recommended to keep
the room temperature 20 to 25°C , 68 to 77°F and use the printer after 1 hour.
¢ Places where the printer must not be installed
Do not install the printer in the following places:
¯ Places exposed to direct sunlight
¯ Places subject to vibration
¯ Places with excessive dust
¯ Places subject to extreme changes in temperature or humidity
¯ Places near an air conditioner or a heater
¯ Places where the printer may get wet
¯ Places subject to direct air circulation from vents
¯ Places near a diazo copier that may generate ammonia gas
¯ Places with poor ventilation
¯ Unstable places