User`s guide

5-21
Troubleshooting
5
Banding dierent at right and left appears on the print.
[ Cause ]
The media is slantingly
advanced.
Basic image
Symptom/Possible Cause Resolution
The media is slantingly advanced.
Media
Media
Skew (winding slippage)
example
Sag example
(1) Check that the media on the roll is straight. If is
not , replace it .
Bad example
Good example
Media
Media
Printer
Printer
(2) Check that the media is traveling straight o
the roll. If not, adjust the position of the ange
holder or shift the media right or left by raising
the Pressure roller up/down lever to set the media
vertically. In addition, when using the take-up reel
unit, adjust the position of ange at the take-up
side or re-set the media. ( P.2-7)
Flange
Flange
Bad example
Good example
Media
Media
(3) Conrm that the media is loaded straight against
the ange. If not, set the media again so that it is
straight. ( P.2-7)
(4) Conrm that the ange is not loose. Re-tighten
the knob of the ange.
Note
- If the media with the ange installed is stood on end, the
media alignment on the roll will become the source of a
possible problem.
Media
Flange
Flange
q How to get good image quality