User`s guide

5-19

Troubleshooting

Bleeding on the print

[ Cause ]

The ink dries slowly. / Too

much ink

Basic image [ Cause ]

Shift of the Print head

position / Shift of the Print

head bi-direction position

Symptom/Possible Cause Resolution

The ink dries slowly. / Too much ink

(1) Raise the heater temperature. ( P.2-41)

(2) Print in the image gradient [HIGHLIGHT1] or

[HIGHLIGHT2].( P.3-31)

(3) When printing in the print mode [DENSITY],

change it to [QUALITY]. ( P.3-25)

(4) When printing in the [BI-DRECTION] print mode,

change it to [UNI-DIRECTION]. ( P.3-26)

Shift of the Print head position /

Shift of the Print head bi-direction

position (horizontal ghosting)

(1) Adjust the Print head position. (

P.4-39)

(2) Adjust the bi-direction of Print head. ( P.4-34)

The lost print occurs at the start of printing.

Symptom/Possible Cause Resolution

Out of the operating temperature

and humidity range

Use the printer within the operating temperature and

humidity range. ( P.1-3)

q How to get good image quality