User`s guide

5-4
Although the printer is in the print mode, printing does not start with
"PREHEATING" displayed on the operation panel.
Symptom/Possible Problem Resolution
Room temperature Raise the room temperature. (Recommended
temperature: 20 to 25ºC)
Aect of air ow If the air from the air conditioner or fan is blowing
against the paper guide, avoid the air ow (by
changing air ow direction, orientation of the printer
or the location of the printer).
Delayed printing after sending data
Symptom/Possible Problem Resolution
Online LED (Blinking) Check the communication between the printer and
computer.
Poor image quality
Refer to P.5-15 [How to get good image quality].
White paper
Symptom/Possible Problem Treatment
Ensure the correct le is being sent
to the printer
Conrm the transfer of data to the printer and the
correct le.
Media jams
Symptom/Possible Problem Resolution
Type of media Conrm the type of set media matches with the
media loaded.
( P.2-7 [Media replacement])
State of media set Set correctly the media.
(
P.2-7 [Media replacement])
An obstacle is caught in the
carriage path.
Remove the obstacle.
(
P.5-6 [How to clear the media jams])
An obstacle is caught in the media
path.
Remove the obstacle.
( P.5-6 [How to clear the media jams])