User`s guide

4-45
Maintenance and Adjustment / Replacement
4
STEP 2 How to enter the correction value
As an example, the case that the “LS ADJ TOP VAL” is +1.0mm and the “LS ADJ
SIDE VAL” is -1.0mm will be described here.
7
After selecting ADJUST MENU, press
key to display [LS ADJ TOP VAL].
8
Press key and make it ready for
entering the parameter.
9
Enter the adjustment correction value.
Select the digit with
, keys and
change the value with
, keys.
For how to determine the correction value, see P.4-44.
10
Press key.
11
press key to display [LS ADJ SIDE
VAL].
12
Press key and make it ready for
entering the parameter.
#LS ADJ TOP VAL
>+0.0mm
#LS ADJ TOP VAL
*
+
0
.0mm
#LS ADJ TOP VAL
*+0.0mm
#LS ADJ TOP VAL
>-1.0mm
#LS ADJ SIDE VAL
>+0.0mm
#LS ADJ SIDE VAL
*
+0.0mm
q Head position adjustment