User`s guide

4-44
6
Press key. Then the adjustment
pattern shown in the gure below is
printed.
#TEST PRINTS
*
EXECUTING
media advance direction
[LS ADJ PRINT] print sample
Blank area
Media feeding direction
Media feeding direction
Blank area
Measure the blank area with 15mm as the reference value to obtain
the adjustment correction value.
• How to measure the “LS ADJ TOP VAL”
<Example>
When the blank area is 14mm : The adjustment correction value will be –1.0mm.
When the blank area is 16mm : The adjustment correction value will be +1.0mm.
Measure the length (blank area) between
the adjustment pattern and the cut
media.
• How to measure the “LS ADJ SIDE VAL”
•How to calculate the adjustment correction value
Measure the length (blank area) between the
adjustment pattern and the edge of the media.