User`s guide

4-42
STEP 2 How to enter the correction value
6
After selecting ADJUST MENU, press
key to display [PH R/L ADJ VAL].
7
Press key to move the cursor and
change the head color with
,
keys.
This is an example of the M (magenta) color Print head adjustment.
8
Press key to decide the head color
to be corrected and make it ready for
entering the parameter.
9
In the [ADJUST PH R/L] patterns, enter the numeral of pattern where two lines
of each color Print head are aligned in one.
Select the digit with
, keys and change the value with , keys.
10
Press key.
11
Adjust other colors using the same method.
#PH R/L ADJ VAL
#Y >+00
#PH R/L ADJ VAL
#M
*
+00
#PH R/L ADJ VAL
#M >+00
Enter the number of the pattern where two lines
are aligned most closely.
For example, when setting the M color Print head,
in “-21” in the gure to the right, two lines are sepa-
rated and in “-8” two lines are aligned in one. So “-8”
is the correct value.
#PH R/L ADJ VAL
#M >-08
-8 -21
M M
#PH R/L ADJ VAL
#M >-08