User`s guide

4-41
Maintenance and Adjustment / Replacement
4
[ADJUST PH R/L] adjustment procedure
Adjust the head position of each Print head’s right and left nozzles position, using
K Print head as a reference.
Read the result of [ADJUST PH R/L] print and enter the appropriate value.
STEP 1
How to print the adjustment pattern [ADJUST PH R/L]
1
Set the printer to the oine. (Press
key.)
2
Press key twice to display ADJUST
MENU.
3
Press key and then key to display
[TEST PRINTS].
4
Press key, select [ADJUST PH R/L] and
press
key.
5
Press key. Then the adjustment
pattern shown in the gure below is
printed.
#TEST PRINTS
*
EXECUTING
#TEST PRINTS
*
ADJUST PH R/L
#TEST PRINTS
*
NOZZLE PRINT
hPRINTER SETUPi
fADJUST HEATERg
hINK MEDIA REGi
fMEDIA M.ADVg
-1
+31
-32
0
-31
+1
-30
+2
-29
+3
-28
+4
media advance direction
[ADJUST PH R/L] print sample
q Head position adjustment